does anyone know any trick on how to the nocks in your arrow tight (without glue) i recently removed them to fletch them and the wont fit in place snug anymore[confused]
nocks wont stay IN!!
Troutslayer
1 - 16 of 16 Posts
Joined
·
1,786 Posts
does anyone know any trick on how to the nocks in your arrow tight (without glue) i recently removed them to fletch them and the wont fit in place snug anymore[confused]
Joined
·
912 Posts
Joined
·
6,206 Posts
I know you said no glue,I'm assuming you think that would be permanent.NOT if you use cool blue,or like duke said teflon.
Joined
·
1,786 Posts
ok il try different glue i think super glue is a bad idea
Joined
·
1,418 Posts
Take a pair of needle nose pliers or cutters and pinch the plastic so it raises a bit. Could also put string wax on them. Though I've found that as long as there is just a little friction they stay in without a issue.
Joined
·
1,089 Posts
Trout, I've used Saran Wrap believe it or not. I place a small piece of it over the arrow end of the nock and insert. If this doesn't work just get a batch of new nocks. I had the same issue years ago with Beman ICS arrows.
Joined
·
9,714 Posts
This is the best way mentioned . DO not glue your nocks in
Joined
·
1,786 Posts
yes i have the beeman ics arrows too
Joined
·
3,967 Posts
Saran wrap!!! It works wonders
I'd buy new nocks. If that isn't an option a drop of hot glue will work, just a drop. That way if (or when) you need to remove them you can use a heat gun a "warm" the area and it comes out. Also a good trick is, if you recently cut the tube before you put the nock in, clean the carbon dust out real good. Sometimes the dust makes things not lock in well.
Joined
·
225 Posts
Saran wrap or plastic grocery bags. Don't glue them.
1 - 16 of 16 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
