[Death from above]

While on the last trip to TX I realized I needed to get a leg holder for my Drury Aluminator call.
I've killed a flock of birds with it but always had to drop it at the last second to make the shot.
But not any more.
I went to Lowe's and for under ten dollars and an hour of time my problem was solved.
I cut a 3" black PVC coupling on a slight arch on two opposite sides.
Then drilled four one inch holes above each arch.
Made two one inch slots to put the leg strap through
and painted. I used two small drops of hot glue to hold the call in place.
Hope others will use the idea. Good luck to everyone next week.

On the right leg and sounding good.

 

[redneck]

Now that is good old fashing thinkin!

 

[gobblergetter]

[cool]Cool Beans[cool]

I like it [up]

 

[super x]

You have way to much time on your hands

 

[Death from above]

I knew you would say that!
Be nice or I won't paint your B-Mobile head.

 

[Grits N Gravy]

Great idea! Any change in sound though?

 

[cuervo25_1]

Looks like a piston almost lol. but that is good thinking. PVC a sportsmans friend,Before i could drive i made a pvc carrier for my bike.now I drive when i get a chance i will make a larger one for the jeep.Fishing rod holders,and a ton of other uses .

 

[barebackjack88]

Nice work and good idea [up]

I was wondering the same thing Grits N Gravy was though...Does it change the sound at all?

 

[bearcub20ga]

looks nice.[up]

 

[SxSshooter]

that idea isn't new!

 

[Stickythehunter]

Good thinking, I may have to try this out!! [up][up]

 

[remingtonman1108]

great idea! [up]

 

[Death from above]

I was wondering the same thing Grits N Gravy was though...Does it change the sound at all?
__________________

Yes it did. The hot glue made it to stiff. So I cleaned it up and used a rubber band instead. Now it works fine.