Your Ad Here
NewJerseyHunter.com
Sponsored By...
Wildlife Taxidermy By Richard G. Santomauro
Wall, NJ
(732) 449-5950 - rgswildlife@yahoo.com

http://www.RGSWildlifeTaxidermy.com
»User: »Password:   Remember Me? 
NJ Hunter / New Jersey Hunting / How To / SBEII
Posted:  17 Mar 2008 1:26 PM
I should be picking up my new SBEII in the next couple weeks.  Does anyone have problems with cycling with the interia system when shooting a typical sporting clays load out of them?
__________________
Git R Done!
Posted:  17 Mar 2008 1:37 PM
SBE I and II are probably the best guns on the market for variety of loads it will tolerate.  I've never had a problem shooting 3.5 inch mags and 2.75 inch low brass.
__________________
Life Member NRA, NAHC, NAFC
Member NJWF, NWTF, NRHRC, NJFSC
Recording Sec. SORG
Posted:  17 Mar 2008 1:40 PM
i was told when i bought mine that a larger load will cycle better till its broken in.
__________________
If Guns kill people Then...

-pencils mis spel words,
-cars make people drive drunk,
-spoons made Rosi Odonell fat. steve

hetley75@optonline.net
http://myspace.com/hetley75
http://www.camospace.com/hetley75
http://www.killerskitchen.com
Posted:  17 Mar 2008 9:41 PM
I've had one since they first came out best gun i've ever owned it will cycle anything and everything no problems even right out of the box
Posted:  17 Mar 2008 10:13 PM
They'll cycle 1 1/4oz and 1oz just fine, 7/8oz cycled OK for me for the most part, sometimes hung up, but found it to be ammo specific.

I can't remember which one hung up, but it was cheap ammo.

The Win AAs seemed to cycle best overall in all ranges.
Posted:  15 Aug 2008 10:37 PM
My last gun was an 1187 SPS never had a problem. This last season I bought a SBII black with comfortech stock in 12gauge. Fired a few rounds of buckshot where I bought it becuase they had a range there (some gun store in philly) and before hunting season ran 400 rounds of low brass shooting clays. When I took it in the field (using high brass pheasant loads) I had a problem with the gun failing to eject ONLY the first round. I called Benelli and they had me lubricate the piston and spring inside of the stock. I used CLP as I do with all my guns and havent had any problems since.
__________________
Assault is a type of behavior, not a type of hardware.